|
Solve the problem!! Don't
Just Treat the Symptoms!
Power Vac
America believes that Indoor Air Quality (IAQ) professionals should be problem
solvers. The company
invest in training, licensing, certification, continuing education,
quality control, and state of the art equipment. Working together
with other IAQ specialist...
Our goal is to improve the flow of healthful air by helping residential,
industrial, and commercial clients to assess and remediate the IAQ problem.
Major
Causes for Poor IAQ
- The presence of indoor air
pollutant sources…
- Poorly designed,
maintained, or operated ventilation systems...
- Uses of the building that were
unanticipated or poorly planned when the building was designed
or renovated...
- Lack of properly
implemented coil cleaning procedures.
Antifungal /
Antibacterial Treatment
Microbial contamination of HVAC
systems or structures may indicate severe problems. Look for
the root cause first. Investigate, isolate and remove the
contaminates. Then take steps to prevent and
control the recontamination.
Every building's IAQ is unique because
of construction, mechanical systems, maintenance history and types
of usage.
After complete and proper cleaning of
the HVAC system to all NADCA standards and EPA guidelines, the appropriate areas of the
HVAC system are resurfaced with the FOSTER 40-30
ANTI-BACTERIAL/ANTI-FUNGAL RESURFACING COATING. This
resurfacing product is EPA registered for use in air conditioning
systems and on contaminated walls and ceilings for microbial
control.
FOSTER 40-30 is a low odor, quick setting
water-based surfacing material designed for field or shop
application to faced or unfaced fiberglass duct liner, fiberglass
duct board insulation or galvanized surfaces. It is formulated to
effectively prevent the spread of molds and odor-causing bacteria on
its surface with long term activity. Its low viscosity allows for
application with virtually any type of spray equipment now available
to the market.
FOSTER
40-30 guards against
the re-growth and spread of odor causing bacteria and molds on the
surface of the coated HVAC system or its treated components only. As
a result, the building occupants may enjoy a work space free of the
odor problems often associated with contaminated HVAC duct systems.
FOSTER
40-30 dries to form an
effective air erosion preventive surfacing material sealing and
reinforcing the surface of new or aged duct liner insulation
materials.
|
